Hydraulic bottle jack, 10 t, lifting height 230-460 mm// Denzel

• Stels hydraulic jack with a safety valve is designed to lift loads weighing up to 10 tons.

• The jack is an indispensable tool in a car service, often used during repair and construction work .

• The minimum lifting height of Stels jack is 23 cm.

• The maximum height the jack can lift is 46 see

• This height is sufficient to securely support the lifted load and carry out repairs.

• The safety valve prevents the load from lifting , the mass of which exceeds the mass declared by the manufacturer.

• Also, the jack is equipped with a magnetic collector, which eliminates the presence of chips in the cylinder oil, which significantly reduces the risk of breakage of the jack.

WARNING!

• The jack is not designed to support or move a load for a long time.

• Before lifting, make sure that the load is distributed evenly in the center of the jack bearing surface.

• The mass of the load to be lifted must not exceed the mass specified by the manufacturer.

• Jack during operation must be placed on a horizontal, flat and solid surface.

• After lifting the load, use special stands to support it.

• It is forbidden to carry out any kind of work under a raised load without supports supporting it.

• Before starting work, read the instructions for use of the product.