Hydraulic bottle jack, 20 t, lifting height 244-449 mm// Denzel

• Stels hydraulic jack with a safety valve is designed to lift loads weighing up to 20 tons.

• The jack is an indispensable tool in a car service, often used during repair and construction work .

• The minimum lifting height of Stels jack is 24.4 cm.

• The maximum height that the jack can lift, is 44.9 cm.

• This height is sufficient to provide a rigid support for a raised load and carry out repairs.

• Valve safety prevents the lifting of a load whose mass exceeds the mass declared by the manufacturer.

• The jack is also equipped with a magnetic collector that eliminates the presence of chips in the cylinder oil, which significantly reduces the risk of breakage of the jack.

ATTENTION!

• The jack is not intended for long-term support of the load in weight or for its movement.

• Before lifting, make sure that the load is evenly distributed in the center of the jack's bearing surface.

• The mass of the load to be lifted must not exceed the mass specified by the manufacturer.

• During operation, the jack must be placed on a horizontal, flat and solid surface.

• After lifting the load, use special stands to support it.

• It is forbidden to carry out any kind of work under a raised load without supports supporting it.

• Before starting work, read the instruction manual for the product.