Hydraulic bottle jack, 2 t, lifting height 181-345 mm// Denzel

• Stels hydraulic jack with a safety valve is designed to lift loads weighing up to 2 tons.

• The jack is an indispensable tool in a car service, often used during repair and construction work .

• The minimum lifting height of Stels jack is 18.1 cm.

• The maximum height the jack can lift is is 34.5 cm.

• This height is sufficient to securely support the lifted load and carry out repairs.

• Valve safety prevents the lifting of a load whose mass exceeds the mass declared by the manufacturer.

• The jack is also equipped with a magnetic collector that eliminates the presence of chips in the cylinder oil, which significantly reduces the risk of breakage of the jack and significantly increases its life service.

ATTENTION!

• The jack is not intended for long-term support of a load in weight or for moving it.

• Before lifting, make sure that the load is evenly distributed on the center of the jack's bearing surface.

• The weight of the load to be lifted must not exceed the weight specified by the manufacturer.

• During operation, the jack must be placed on a horizontal, flat and solid surface.

• After lifting the load, it is necessary to use special stands to support it.

• It is forbidden to carry out any kind of work under a raised load without supports supporting it.

• Before starting work, read the instruction manual for the product.